id: 32499
Назва: Energy intensity of the process of destruction of feed grain in conditions of dynamic contact interaction with the edge of the disc impactor
Автори: Kupchuk I., Poberezhets Ju., Kravets R., Lavreniuk P.
Ключові слова: grinding, maize grain, relative deformation, plasticity, fragility, destruction, impact, cutting.
Дата публікації: 2022-12-25 16:11:15
Останні зміни: 2022-12-25 16:11:15
Рік видання: 2022
Аннотація: In the feed industry raw material, grinding is an integral part of the production cycle. However, this
process is characterized by significant energy consumption – from 3 to 100 kW * hour per ton of finished
goods, and only a part of it is directly spent on grinding. Therefore, this scientific research is aimed at
minimizing the consumption of energy resources by technological machines – crushers and improving the
energy efficiency of the process in general is an urgent issue. A powerful modern research method of studying complex objects is system analysis, which enables to modernize existing machines and design new ones without conducting a large number of expensive physical experiments. Unfortunately, this method is not yet widely used in the research and design of new machines for processing agricultural products, since there are no developed and substantiated engineering theories describing the behaviour of the processed material in the workspace of the technological machine. Grinding grain with a moisture content indicator at the level higher than the base condition, there is a low efficiency of the method of impact grinding, that is determined by the increased plasticity of the material and an increase in the value of the marginal deformation, which can lead the grain towards destruction. A partial solution of this problem is possible when combining the method of cutting and hammering, which has formed the basis of a technical solution implemented in the scientific laboratory of Vinnytsia National Agrarian University, where the design has been developed and experimental verification of the vibrating crusher have been carried out. Further improvement of the energy efficiency of the technological operation of grain grinding requires theoretical researches of the dynamics of the process, and determining the minimum amount of energy required for destruction. The article deals with the laws of solid mechanics and the use of rheological methods in researching disperse systems, it presents the values of absolute deformation and the work that is carried out during the destruction of maize grain under the influence of applied impact-cutting load in analytical and graphic form. Moreover, the results of this research help us to establish the marginal values of plastic and elastic absolute deformations occurring in the material, which is a prerequisite for the theoretical substantiation of the grinding law.
URI: http://81.30.162.23/repository/getfile.php/32499.pdf
Тип виданя: Статті у наукових фахових виданнях України (Copernicus та інші)
Видавництво: Техніка, енергетика, транспорт АПК. 2022. № 2 (117). С. 97-103. DOI: 10.37128/2520-6168-2022-2-10
Розташовується в колекціях :
Ким внесений: Адміністратор
Файл : 32499.pdf Розмір : 2861437 байт Формат : Adobe PDF Доступ : Загально доступний
| |
|
|
